|
Buying a Tasar
These notes were written by Tony Keevers, with
assistance from Frank Bethwaite. The notes were written for Australian
buyers, but most comments and tips apply to all Tasars everywhere.
(NOTE: this information is issued in good faith to assist a purchaser.
It is not exhaustive, because every boat is different. No responsibility
is taken for omissions or inaccuracies.)
Some additional information on buying a Tasar
in North America is available here.
Buying a new Tasar
A new Tasar can be ordered direct from the Australian manufacturer - Bethwaite Design Pty Ltd (Frank Bethwaite's own company) located at 2 Waine Street, Harbord on (02) 9938.6003. New boats (complete sail away) are currently priced in the order of $13,210 including GST (this price was current as at 1st July 2000 but is subject to change without notice).
Buying a used Tasar
Sources
Used Tasars can often be found listed for sale in publications such as
Weekly Trading Post. Some sailing clubs will have Tasars advertised for
sale on their notice boards. Alternatively, contact any members of the
Tasar Association to see if they are aware of any Tasars being listed
for sale.
Understanding the Sail Numbers
The Tasar has been built in Australia since January, 1976. Starboard Products
has been the Australian manufacturer. Sail numbers of Australian-built
boats are 750-799, 900-949, then blocks from 1000 to 2730. The sail number
can be found stamped on the transom of the hull between the gudgeons.
The number might look like "2726A0400" which means that this boat was
the 2,726th boat to be built worldwide (the numbering started at #100)
and is the boat's sail number, the A indicates Australian construction,
and 0400 means "built April 2000".
Hull weights
Hull weights have varied throughout the life of the Tasar. The hulls of
boats from 100 to 900 weighed 140lbs (64kg) or a little less. A third
layer of 1oz glass was then added world-wide for added abrasion resistance,
and the hull weight increased to 149lbs (68kg). As the boats were adopted
in Adelaide and Perth with their much stronger average winds and rougher
waters, and particularly when the Tasar was purchased by the Navy for
institutional use by strong, young men and women further strengthening
was added and the weight increased to 154lbs (70kg). About 1995 new laminate
materials became commercially available and it became possible to retain
all the strengthening but reduce the panel weights so that the hull weight
reverted to its design weight of 140lbs (64kg). All hulls built since
1995 have weighed a little less than 140lbs. Because of this history,
the class instituted in 1996 a minimum hull weight for sanctioned races
of 68kg (150 lb). Boats lighter than this are required to carry correctors
to bring them up to the 68kg weight for major events.
Continue to
Valuing a Tasar
Posted 00-08-28
|